Medium Intensity Twin Obstruction Warning Light


We offer premium quality Led - Medium Intensity (Twin Light) that are used as tower warning lights. These high power Omni-directional lights are energy efficient and are ideal for use with solar powered system.

  • Overview

"TECHNOVATORS" Medium Intensity Flashing RED aviation warning light. "Long life solution for marking of tall structures"

  • It is an Omni-Directional light which Conforms to ICAO and FAA regulations.
  • The high power, high flux solid state lamps give an exceptionally long life of more then 50,000 burning hours.
  • It combines the most modern concept of surface mounting solid state Lamps Technology (High Powered Lighting Diodes) from most reputed world source.
  • The System is highly energy Efficient, Which makes it very suitable for solar powered systems.
  • The Lamps are mounted on very durable Epoxy masked PCB's which enables easy replacement in case of failure.
  • Efficient secondary optics is induced to generate Lens effect for Proper Light Beam in Horizontal plane and arrest unnecessary light dispersion in vertical plane as required by the light specifications.
  • High quality Aviation RED colour is directly Emitted by the Lamps thus eliminating the need for additional colour filters, which otherwise get faded due to UV radiation of SUN.
  • The Lamps are arranged in Series and Parallels with independent light strings, which eliminates total blackout, in the event of an unlikely circuit fault.
  • The light housing is made from high grade Aluminium Alloy, with Protective painting.
  • Hardware is made from Corrosion resistant metals.
  • The light is protected from ingress of Dust and Moisture.
  • Bird spike is provided at the top to protect the luminaire from bird droppings.
  • Very high quality copper conductor earthing connection is provided to divert any lightening surges.
  • Solid state Flasher, operating on 12 V DC or 48 V DC is housed in separate weather protected enclosure. Optional voltage adaptability on 220 V AC.
  • Dusk to Dawn operation through Photo sensor.
  • The Duplex Character enhances the reliability by automatically switching from Service lamp to Standby lamp.
  • Technical Specifications
Operating Conditions
  • Temperatures ranging from -20°C to +55°C
  • Will withstand wind in excess of 150 mph (240 kph), (150 knots)
  • Fog, Rain
  • Humidity : 80%
  • Does not create Electromagnetic Interference
  • Does not create Radio Frequency Interference
Photometric Data
Night Mode
Red
Vertical Beam Spread
> 3 °
Horizontal Coverage
360 °
"Ground Scatter Light" cut-off angle
-5 °
Flash Rate
20 - 60 FPM
Electrical Specifications
Input Supply
Operating Voltage
System Operating on DC Volts
Current (Amp)
Volt Amps (VA)
Watts
(V x I)
Min
Max
Min
Max
Min
Max
220V AC with SMPS Supply
175 V
AC
275 V
AC
12 V
8 10 96 120 120
24 V 4 5 96 120 120
48 V 2 2.5 96 120 120
220VAC (50Hz)
175 V
AC
275 V
AC
12 V 8 10 96 120 120
24 V 4 5 96 120 120
48 V 2 2.5 96 120 120
Light Characteristics
ICAO Type
Type "B/C"
Light Source
LED Cluster
Light Color
RED
Intensity
> -2000 cd
Horizontal Divergence
360 °
Lamp Life
> 1,00,000 hrs
Radial Emission
As per CISPR 11
Physical Characteristics
Body Material
Cast Aluminium
Lens Material
Polished Acrylic
Mounting
Hot Dip Galvanized Structure
Height (mm/inches)
544 mm
Width (mm/inches)
395 mm
Mass (Kg/lbs)
13.850 Kg Approx.
Operation
Minimum Autonomy
24 hrs.
Latitude Range
1000 meter
On/Off Level
Automatic
Illumination Technology
Photons generation with LED conduction
Lifespan of LEDs
> 1,00,000 hrs. Approx.
Available Flash Patterns
20 - 60 FPM
Color Technology of LED
Red Light Emitting Diode
Environmental and Electrical
Temperature Range
- 20 ° C to + 50 ° C
Waterproof
Through EPDM Gasket and Sealant
Environment Protection Standard for Light
IP 65 Standard
Environment Protection Standard for Control Panel
IP 55 Standard
Technical Details
Cat No.
Weight
Dimensions
Body Color
Character
TASS - MI - Duplex
23.590Kg Approx.
Height : 740mm
Diameter : 394 mm
White / Optionally
RED
Flashing 20 to 60 Flash/min (Flash rate adjustable)
Operational Voltage
Color of Light Emitted
12 V DC, 24 V DC, 48 V DC, 230 V AC
RED
  • Structure Drawing
Medium Intensity Twin Obstruction Warning Light - drawing

Twin MI Obstruction Light Dimension Detail

Medium Intensity Twin Obstruction Warning Light - mounting drawing

Twin Obstruction Light Mounting Detail

  • Shipping Specifications
  • Shipping details for LED medium intensity twin obstruction lights.
Carton No. Carton Description Net Weight (KG) Gross Weight (KG) Dimn. Vol. CBM
1 TASS-MI-DUPLEX 26 36 450x440x840 0.166
2 Control Panel 14 20 550x465x255 0.065
Know More - Contact us

© Avaids Technovators Pvt. Ltd., 2022. All Rights Reserved.